Engine Lubrication Systems

Engine Lubrication System

Engines have very large number of moving components. These components move relative to each other and bear huge amount of friction. This friction generates heat and is responsible for wear and tear of the Engine Components. In many cases, the wear and tear may get so severe that it starts affecting the engine performance. Also, the heat generated due to friction may get such higher that, it may even weld the contact surfaces together. Hence, we need to prevent the direct contact between the moving components of the Engine. This is done by providing proper lubrication to the engine components and this lubrication is done using Engine Oil. This lubricant is circulated all across the engine through Oil galleries and other mechanisms.

    Functions Of Engine lubrication System

    Functions of Engine Lubrication System

    Apart from lubricating the Engine Components, the engine lubrication system performs several other vital functions. Many of those functions are essential for engine performance and its life. Let's look at some of those functions one by one.

    • Engine Oil helps in removal of heat generated due to friction between rhe components.
    • The Engine Lubrication System Circulates the Engine Oil across the whole engine, hence it helps in cleaning of all the components.

    Types Of Engine Lubrication Systems

    Depending upon the need and the type of engine, there may be several types of Engine Lubrication Systems. Every system has its own advantages and disadvantages.

    Mist Lubrication System

    Mist Lubrication system
    Mist lubrication system was used for lubrication in 2-Stroke Engine. In this system of lubrication, the Engine Oil was mixed with the fuel and supplied to the Engine. This mixture was converted in to fine vapors in the Carburetor. This fine mixture of Fuel and Lubricant forms mist. This mist helps in Lubricating the components inside the Engine. This system is very simple and do not require components such as lubricating pump, Lube Oil Filter or Oil sump. However, one major disadvantage of this system is burning of Engine Oil along with the fuel. This causes a lot of pollution and also reduces the efficiency of the engine. 

    Pressure Feed Lubrication System

    Pressure feed Lubrication syatem
    Pressure Feed Lubrication System is used in most of the modern Engines. This system  consists of an Oil storage sump or tank from which pressurised Engine Oil is supplied to all the Engine components. This system keeps the fuel and Lubricant separated from each other, increasing the efficiency of engine.  Pressure Feed Lubrication System provides better lubrication since it do not suffer with the problem of mixing of Engine Oil and fuel. This system consists of separate galleries for supplying Engine Oil to different components of Engine. These galleries are located  all around the Engine forming a closed flow circuit. This Lubrication System consists of an Oil storage tank called sump. From sump, the Engine Oil is pumped out using a pump. It is then supplied to the Oil filter to separate out the dirt and debris from it. These dirt and debris may damage the Engine components and may lead to their malfunction. After getting filtered, the Engine Oil travels through the Oil galleries to Cylinder Head, Crankshaft Bearings, Cylinder Walls etc. The Crankshaft Bearings are Plane Bearings having no rolling balls. These bearing require a thin film of Engine Oil to be present around their shaft surface, for proper functioning and Lubrication. This Oil is supplied through the Oil galleries. After lubricating the Crankshaft Bearings, the Engine Oil travels along the  Crankshaft to the big end of  Connecting Rods through oil galleries inside the Crankshaft. Here, it lubricates the big end of Connecting Rod and further travels along the Oil galleries in Connecting Rods to the Gudgeon Pin. Some of the Engine Oil leaks at the joints of the Connecting Rods and the Crankshaft. From here, it is thrown towards the Cylinder Walls due to reciprocating motion of the Piston. This helps in Lubricating the Cylinder Walls. The excess Oil from Cylinder Walls is  scrapped using the Oil Ring on the Piston, which falls in to the Oil Sump. One branch of galleries from the Oil Pump takes the Oil to the Cylinder Head, where it lubricates the Camshaft and Rocker Arms. From here, the Oil moves to the Oil sump. 

    Types Of Pressure Feed Lubrication System

    Depending upon the size of Oil sump, the Pressurised Lubrication System is further classified into:

    • Wet Sump Lubrication System
    • Dry Sump Lubrication System

    Wet Sump Lubrication System

    Pressure feed Lubrication System

    This type of Lubricating system is very common and is used in most of the modern vehicles. They consist of a large size Oil Sump to store the Engine Oil. The Oil from the sump is supplied to the Oil galleries through an Oil Pump.  The Wet Sump Lubrication System is simple in design and  requires very less number of components as compared to the Dry Sump Lubrication System. They also do not need hoses and other pipes to supply Oil to the Oil tank as their Oil is stored in their Sump only. The large size of the Oil sump increases the size of Engine, shifting the centre of gravity upwards.

    Dry Sump Lubrication System

    Engine Lubrication System
    The Pictures of The Components Are For Reference Only

    Dry Sump Lubrication System is generally used in sports cars. This system consists of a smaller Sump for temporary Engine Oil collection. The Oil from the Sump is supplied to a storage tank using scavenging pump. The Oil Storage Tank consists of perforated baffle plates to separate out air from the Engine Oil. The Storage Tank is not the part of Engine and lies away from it. From storage tank the Oil is supplied through main Oil Pump to Oil filter and than to intercooler. The Intercooler is used to keep the Engine Oil cool which is necessary to maintain its viscosity. This system can store a large amount of Engine Oil in its Oil storage tank, without increasing the engine size. This system maintains a continuous and pressurised supply of lubricant necessary for performance cars. This system also prevents the drag and friction losses which occurs due to splashing of engine oil by the Connecting Rod. However, this system is very complex and increases the overall cost of the vehicle. 

    Friends this was a small overview of Engines Lubrication System. We hope you enjoyed it. More more interesting information please subscribe yo our newsletter.

    Powered by Blogger.